Been troubleshooting this one and have not come up with the correction. My ifcfg-eth0 file has a static of 192.168.1.122. If you notice, it does not say eth0 but eth0_rename Link encap:Ethernet. Any ideas how to get my eth0 file back?
eth0_rename Link encap:Ethernet HWaddr 00:0C:29:C2:EA:25
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fec2:ea25/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8482 errors:0 dropped:0 overruns:0 frame:0
TX packets:7300 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8720523 (8.3 MiB) TX bytes:1092408 (1.0 MiB)
Interrupt:18 Base address:0x1400
Cabrillo College Linux Classes
Help forum for Rich's students
interfaces
2 posts • Page 1 of 1
interfaces
by denise gant on Tue Apr 28, 2009 3:37 pm
[color=#8000BF][b]Think like you have no brain[/b][/color]
-
denise gant - Posts: 67
- Joined: Tue Sep 02, 2008 7:13 pm
Re: interfaces
by John LeMieux on Tue May 05, 2009 5:54 pm
What does the DEVICE line of ifcfg-eth0 say? It should be eth0.
-
John LeMieux - Posts: 22
- Joined: Tue Sep 02, 2008 7:12 pm
2 posts • Page 1 of 1
Return to CIS 192 - Spring 2009
Who is online
Users browsing this forum: No registered users and 0 guests